Internet Info 1994 March/Internet Info CD-ROM (Walnut Creek) (March 1994).iso/networking/terms/kermit/a/cpxbbi.asm

Assembly Source File | 1991-04-22 | 17.9 KB | 619 lines

IF NOT lasm
.printx * CPXBBI.ASM *
ENDIF    ;NOT lasm
;       KERMIT - (Celtic for "FREE")
;
;       This is the CP/M-80 implementation of the Columbia University
;       KERMIT file transfer protocol.
;
;       Version 4.08
;
;       Copyright June 1981,1982,1983,1984,1985
;       Columbia University
;
; Originally written by Bill Catchings of the Columbia University Center for
; Computing Activities, 612 W. 115th St., New York, NY 10025.
;
; Contributions by Frank da Cruz, Daphne Tzoar, Bernie Eiben,
; Bruce Tanner, Nick Bush, Greg Small, Kimmo Laaksonen, Jeff Damens, and many
; others.
;
;
;
; revision history:
;
;edit 4, 7-Jan-1991 by MF. Added code to support the Ampro Little Board.
;    The code was contributed by Jay S. Rouman; 913 North Drive;
;    Mt. Pleasant, MI 48858 (voice [phone]).
; edit 3, 23 July by OBSchou to massage file to suit CPXCOM.ASM
;
; edit 2 23 May 1987 by C.J.MILES@UMRCC.
;    Reorganised file to be similar in structure to that
;    of the Amstrad sys-dep file. Added hangup in clear
;    screen options in CONNECT mode.
;
; edit 1 10 May 1987 by Chris Miles (C.J.MILES@UMRCC)
;        Removed Kaypro, Xerox and Big Board from CPXSYS.ASM
;        and grouped them into this file as CPXBBI.ASM.
;
;
;
; Original code broken off and modified by:
;
; Chris Miles
; 344, Claremont Road,
; Rusholme,
; MANCHESTER,
; M14 6WB.
;
; Tel: [phone]
;

;
;         *** MAIN CODE START ***
;
;
; Keep module name, edit number, and last revision date in memory.

sysedt: db      'CPXSYS.ASM (35) 01-Dec-86$'
family: db    'CPXBBI.ASM (4)  7-Jan-1991$'


; Assembly time message announcing which version we're building

IF kpii
.printx * Assembling Kaypro II KERMIT-80 *
ENDIF

IF xer820
.printx * Assembling Xerox 820 KERMIT-80 *
ENDIF

IF bbII
.printx * Assembling BigBoard II KERMIT-80 *
ENDIF

IF ampro
.printx * Assembling Ampro Little Board KERMIT-80 *
ENDIF

z80    EQU    TRUE    ; They all use Z80s

IF xer820
defesc  EQU     ']'-100O        ;The default escape character for Xerox
ENDIF;xer820

IF kpII
defesc  EQU     '\'-100O        ;The default escape character for Kaypro
ENDIF;kpII

; If one of the above, default to VT52-EMULATION ON.
IF kpII OR xer820
vtval   EQU     1
ENDIF;kpII OR xer820


;
; Specific machine hardware information
;
IF bbI
mnport  equ     04h             ; Modem data port
mnprts  equ     06h             ; Modem status port
output  equ     04h             ; Transmit buffer empty
input   equ     01h             ; Receive data available
baudrt  equ     00h             ; Baud rate port for channel A
ENDIF;bbI


IF bbII
mnport  equ     80h             ; Modem data port (SIO channel A)
mnprts  equ     81h             ; Modem status port
output  equ     04h             ; Transmit buffer empty
input   equ     01h             ; Receive data available
baudrt  equ     89h             ; Baud rate port for channel A
ENDIF;bbII

IF ampro
mnport  equ     88h             ; Modem data port (SIO channel B)
mnprts  equ     8Ch             ; Modem status port
output  equ     04h             ; Transmit buffer empty
input   equ     01h             ; Receive data available
baudrt  equ     50h             ; Baud rate port for channel B
ENDIF;ampro
;

sysxin:        ;continuation of system initialisation code
        lxi     d,siotbl        ; Load the address of the status able
        mvi     c,siolen        ; Length of status table
siolup:             ; Loop back here for each command byte
        ldax    d               ; Load the first byte into A
        inx     d               ; Index the pointer
        out     mnprts          ; Send it to the status port
        dcr     c               ; Decrement the byte counter
        jnz     siolup          ; Jump back for more commands
        ret                     ; return from system-dependent routine

; List of commands to set up SIO channel A for asynchronous operation.

siotbl: DB      18H             ; Channel reset
        DB      18H             ; another, in case register 0 wasn't selected
        DB      04H             ; Select register 4
        DB      44H             ; 1 stop bit, clock*16
        DB      01H             ; Select register 1
        DB      00H             ; No interrupts enabled
        DB      03H             ; Select register 3
        DB      0C1H            ; Rx enable, 8 bit Rx character
        DB      05H             ; Select register 5
        DB      0EAH            ; Tx enable, 8 bit Tx character,
                                ;  raise DTR and RTS
siolen  equ     $-siotbl        ; length of command list


;
; sysexit - System-dependent termination processing
;         if we've changed anything, this is our last
;        chance to put it back.
;
sysexit:
        ret

;
; syscon - System-dependent processing for start
;       of CONNECT command.
;
syscon:
    lxi    d,conmsg
    call    prtstr
        ret

conmsg:         ; Messages printed when entering transparent (CONNECT) mode:
    db    cr,lf,'$'
;
; syscls - system-dependent close routine
;          called when exiting transparent session.
;
syscls:
        ret
;
; sysinh - help for system-dependent special functions.
;          called in response to <escape>?, after listing
;          all the system-independent escape sequences.
;
sysinh:
        lxi     d,inhlps        ; we got options...
        call    prtstr          ; print them.
        ret


; additional, system-dependent help for transparent mode
; (two-character escape sequences)
inhlps:
        db      cr,lf,'B  Transmit a BREAK'
    db    cr,lf,'H  Hangup using DTR'
    db    cr,lf,'W  Wipe screen clear'
    db    '$'

; sysint - system dependent special functions
;          called when transparent escape character has been typed;
;          the second character of the sequence is in A (and in B).
;          returns:-
;                non-skip: sequence has been processed
;                skip    : sequence was not recognized
;
sysint: ani     137O            ; convert lower case to upper, for testing...
        cpi     'B'             ; send break ?
        jz      sendbr          ; then jump to send break routine
    cpi    'H'        ; hang up ?
    jz    hangup        ; then jump to hangup routine
    cpi    'W'        ; clear screen ?
    jz    clrtop        ; then jump to clear screen routine
        jmp     rskp            ; take skip return - command not recognized.

;
; Hangup and Break routines
;
hangup:
    mvi    d,0ah        ; set up hangup bit mask
    mvi    e,255        ; time for hangup is 2 1/2 secs
    jmp    setbit        ; skip Tx empty test

sendbr:
    mvi    d,9ah        ; set up break bit mask
    mvi    e,30        ; time for break is 300 ms

sndbr1: mvi     a,1             ; select Read Register 1
        out     mnprts
        in      mnprts          ; read the contents
        ani     1               ; test "all done" flag
        jz      sndbr1          ; loop until it's nonzero.
;
; Next, set the break or DTR bit on the SIO
;
setbit:
    mvi     a,5        ; select Write Register 5
        out     mnprts
        mvi     a,6ah        ; Tx enable, 8 bit Tx character,
    ora    d        ; OR with appropriate bit mask
    out     mnprts          ;
;
;       Now, delay for duration of hangup or break
        mov     a,e        ; delay count
        call    delay
;
;       Time's up. Put transmitter back in normal state and return.
        mvi     a,5             ; select Write Register 5
        out     mnprts
        mvi     a,0eah        ; Tx enable, 8 bit Tx character,
        out     mnprts          ;.
        ret                     ; done.

; sysflt - system-dependent filter
;          called with character in E.
;          if this character should not be printed, return with A = zero.
;          preserves bc, de, hl.
;          note: <xon>,<xoff>,<del>, and <nul> are always discarded.
;
sysflt:
        mov     a,e             ; get character for testing
    ret

;
; sysbye - system-dependent processing for BYE command.
;
sysbye:
        ret
;
; This is the system-dependent command to change the baud rate.
; DE contains the two-byte value from the baud rate table; this
; value is also stored in 'speed'.
;
sysspd:

; Set the speed for bigboard II
IF bbII
        di                      ; don't let anything between the data bytes
        mvi     a,01000111b     ; get the command byte (load time constant)
        out     baudrt          ; output it to CTC
        mov     a,e             ; Get the parsed value.
        out     baudrt          ; Tell the baud rate generator.
        ei                      ; end of critical section
        ret
ENDIF;bbII


; Set the speed for bigboard I
IF bbI
        mov     a,e             ; get the parsed value
        out     baudrt          ; Tell the baud rate generator.
        ret
ENDIF;bbI

; set the speed for the Ampro Little Board
if ampro
    mvi    e,3fh        ; offset to port b ctc 3f hex bytes
    call    getbios
    mvi    a,47h        ; counter mode,ctc reset,value follows
    mov    m,a        ; store value
    lda    speed+1        ; get ctc divisor
    inx    h        ; location of ctc divisor
    mov    m,a        ; store new divisor
;
; set up wr4 clock divisor according to mspeed
;
    mvi    e,50h        ; offset to dart wr4
    call    getbios
    mvi    a,3fh        ; mask for wr4 clock bits
    ana    m        ; mask off bits
    mov    m,a        ; and save to wr4
    lda    speed        ; get clock flag
    ora    a        ; set flags, zero = 300 bps
    mvi    a,80h        ; x32 clock bit
    jz    lbps        ; setup wr4 for 300 bps x32 clock
;
;  set up wr4 value for 1200 bps x16 clock 'hl' has wr4 loc
;
hbps:    mvi    a,40h        ; x16 clock
;
;  setup wr4 value for 300 bps x32 clock 'hl' has wr4 loc
;
lbps:    ora    m        ; set clock bits saving parity
    mov    m,a        ; store new clock divisor to wr4 value
;
;  initialize sio/dart
;
intsio:    lxi    h,intend
    push    h        ; set up for return
    mvi    e,36h        ; offset to ioinit
    call    getbios
    pchl            ; we pushed return address
intend:    ret

;
;  return bios location in 'hl' called with offset in 'e'
;
getbios:
    lhld    1        ; get bios location
    mvi    d,0        ; clear 'd'
    dad    d
    ret
;
ENDIF;ampro

;
;       Speed tables
; (Note that speed tables MUST be in alphabetical order for later
; lookup procedures, and must begin with a value showing the total
; number of entries.  The speed help tables are just for us poor
; humans.

;       db      string length,string,divisor (2 identical bytes or 1 word)
; [Toad Hall]

IF bbI
spdtbl: db      10h                     ;16 entries
        db      03h,'110$',     02h,02h
        db      04h,'1200$',    07h,07h
        db      05h,'134.5$',   03h,03h
        db      03h,'150$',     04h,04h
        db      04h,'1800$',    08h,08h
        db      05h,'19200$',   0fh,0fh
        db      04h,'2000$',    09h,09h
        db      04h,'2400$',    0ah,0ah
        db      03h,'300$',     05h,05h
        db      04h,'3600$',    0bh,0bh
        db      04h,'4800$',    0ch,0ch
        db      02h,'50$',      00h,00h
        db      03h,'600$',     06h,06h
        db      04h,'7200$',    0dh,0dh
        db      02h,'75$',      01h,01h
        db      04h,'9600$',    0eh,0eh

sphtbl: db      cr,lf,'   50     75    110    134.5  150    300    600   1200'
        db      cr,lf,' 1800   2000   2400   3600   4800   7200   9600  19200$'
ENDIF;bbI

IF bbII
spdtbl: db      8                       ; 8 entries
        db      04h,'1200$',    20h,20h
        db      05h,'19200$',   02h,02h
        db      04h,'2400$',    10h,10h
        db      03h,'300$',     80h,80h
        db      05h,'38400$',   01h,01h
        db      04h,'4800$',    08h,08h
        db      03h,'600$',     40h,40h
        db      04h,'9600$',    04h,04h

sphtbl: db      cr,lf,'   300   600  1200  2400  4800  9600 19200 38400$'
ENDIF;bbII


IF ampro
spdtbl: db      6                       ; 6 entries
        db      04h,'1200$',    1,104
        db      04h,'2400$',    1,52
        db      03h,'300$',     0,208
        db      04h,'4800$',    1,26
        db      03h,'600$',     1,208
        db      04h,'9600$',    1,13

sphtbl: db      cr,lf,'   300  600  1200  2400  4800  9600$'
ENDIF;ampro

; This is the system-dependent SET PORT command.
; HL contains the argument from the command table.
;
sysprt:
        ret
;

prttbl  equ     0               ; SET PORT is not supported
prhtbl  equ     0

;
; selmdm - select modem port
; selcon - select console port
; selmdm is called before using inpmdm or outmdm;
; selcon is called before using inpcon or outcon.
; preserves BC, DE, HL.
;
selmdm:
selcon:
        ret
;
; Get character from console, or return zero.
; result is returned in A.  destroys bc, de, hl.
;
inpcon:
        mvi     c,dconio        ;Direct console I/O BDOS call.
        mvi     e,0FFH          ;Input.
        call    BDOS
        ret
;
;
;       Output character in E to the console.
;       destroys bc, de, hl
;
outcon:

        mvi     c,dconio        ;Console output bdos call.
        call    bdos            ;Output the char to the console.

        ret
;
;
;       outmdm - output a char from E to the modem.
;               the parity bit has been set as necessary.
;       returns nonskip; bc, de, hl preserved.
outmdm:
        in      mnprts          ;Get the output done flag.
        ani     output          ;Is it set?
        jz      outmdm          ;If not, loop until it is.
        mov     a,e
        out     mnport          ;Output it.
        ret


;
;       get character from modem; return zero if none available.
;       destroys bc, de, hl.
inpmdm:
        in      mnprts          ;Get the port status into A.
        ani     input           ;See if the input ready bit is on.
        rz                      ;If not then return.
        in      mnport          ;If so, get the char.

    ret                     ; return with character in A


;
;       flsmdm - flush comm line.
;       Modem is selected.
;       Currently, just gets characters until none are available.

flsmdm: call    inpmdm          ; Try to get a character
        ora     a               ; Got one?
        jnz     flsmdm          ; If so, try for another
        ret                     ; Receiver is drained.  Return.
;
;       lptstat - get the printer status. Return a=0ffh if ok, or 0 if not.
lptstat:
        xra     a               ; assume it is ok.. this may not be necessary
        ret

;
;       outlpt - output character in E to printer
;       console is selected.
;       preserves de.
outlpt:
        push    d               ; save DE in either case
        ana     a               ; if A = 0 do nothing,
        jz      outlp1          ; [30] if a=0 do nothing
        mvi     c,lstout
        call    bdos            ;Char to printer
outlp1: pop     d               ; restore saved register pair
        ret
;

;
;       Screen manipulation routines
;       csrpos - move to row B, column C
;
;       csrpos for terminals that use a leadin sequence followed
;        by (row + 31.) and (column + 31.)
;
IF NOT (bbII OR ampro)            ;[obs I think ]
csrpos: push    b               ; save coordinates
        lxi     d,curldn        ; get cursor leadin sequence
        call    prtstr          ; print it
        pop     h               ; restore coordinates
        mov     a,h             ; get row
        adi     (' '-1)         ; space is row one
        mov     e,a
        push    h
        call    outcon          ; output row
        pop     h
        mov     a,l             ; get column
        adi     (' '-1)         ; space is column one
        mov     e,a
        jmp     outcon          ; output it and return
ENDIF    ; NOT bbII OR ampro

;
; delchr - make delete look like a backspace.  Unless delete is a
;          printing character, we just need to print a backspace
;          (we'll output clrsp afterwards)
delchr:

IF bbI
        lxi     d,delstr
        jmp     prtstr
ENDIF;bbI


IF NOT bbI
        mvi     e,bs            ;get a backspace
        jmp     outcon
ENDIF;NOT bbI

; erase the character at the current cursor position
clrspc: mvi     e,' '
        call    outcon
        mvi     e,bs            ;get a backspace
        jmp     outcon

; erase the current line
clrlin: lxi     d,eralin
        jmp     prtstr

; erase the whole screen, and go home. preserves b (but not c)
clrtop: lxi     d,erascr
        jmp     prtstr

; If its a BigBoard or Ampro, we need a terminal, so link to CPXVDU.ASM
IF bbII
sysver:    db    'Big Board II$'
ENDIF;bbII

IF ampro
sysver:    db    'Ampro Little Board$'
ENDIF;ampro

IF (bbII AND lasm)    ; we need a terminal as well
LINK CPXVDU.ASM
ENDIF    ;(bbII AND lasm)

IF (ampro AND lasm)    ; we need a terminal as well
LINK CPXVDU.ASM
ENDIF    ;(ampro AND lasm)

;If here, we are Kaypro or Xerox 820, or if from M80, we should skip
; a few lines if Bigboard.

IF kpii
sysver:
ttytyp:    db    'Kaypro II$'
outlin:    db    subt,cr,lf,tab,tab,'$'
erascr:    db    subt,'$'                ;Clear screen and home.
eralin:    db    cr,18H,'$'              ;Clear line.
curldn:    db    esc,'=$'                ;Cursor lead-in
delstr:    db    bs,' ',bs,bs,'$'        ; adjust for echoing delete character
ttab:                    ;Table start location.
ta:    db    0BH,'$',0,0             ;Cursor up.
tb:    db    0AH,'$',0,0             ;Cursor down.
tc:    db    0CH,'$',0,0             ;Cursor right.
td:    db    bs,'$',0,0              ;Cursor left
te:    db    subt,'$',0,0            ;Clear display
tf:    db    esc,'G$',0              ; Enter Graphics Mode (select Greek)
tg:    db    esc,'A$',0              ; Exit Graphics mode (select ASCII)
th:    db    1EH,'$',0,0             ; Cursor home.          [UTK016]
ti:    db    esc,'E','$',0           ; Reverse linefeed. (insert line)
tj:    db    'W'-100O,'$',0,0        ; Clear to end of screen.
tk:    db    'X'-100O,'$',0,0        ; Clear to end of line.
ENDIF ; kpii
;

IF xer820
ttytyp:
sysver:    db    'Xerox 820$'
outlin:    db    subt,cr,lf,tab,tab,'$'
erascr:    db    subt,'$'                ;Clear screen and home.
eralin:    db    cr,18H,'$'              ;Clear line.
curldn:    db    esc,'=$'                ;Cursor lead-in
delstr:    db    bs,' ',bs,bs,'$'        ; adjust for echoing delete character
ttab:                    ;Table start location.
ta:    db    0BH,'$',0,0             ;Cursor up.
tb:    db    0AH,'$',0,0             ;Cursor down.
tc:    db    0CH,'$',0,0             ;Cursor right.
td:    db    bs,'$',0,0              ;Cursor left
te:    db    subt,'$',0,0            ;Clear display
tf:    db    '$',0,0,0               ; Enter Graphics Mode (can't)
tg:    db    '$',0,0,0               ; Exit Graphics mode (can't)
th:    db    1EH,'$',0,0             ; Cursor home.          [UTK016]
ti:    db    0BH,'$',0,0             ; Reverse linefeed. (cursor up)
tj:    db    11H,'$',0,0             ; Clear to end of screen.
tk:    db    18H,'$',0,0             ; Clear to end of line.
ENDIF ; xer820
ovlend    equ    $    ; End of overlay

    END